Product Name

Description

Application

Molub-Alloy Gear Oils

Molub-Alloy Gear Oils were developed for the lubrication of enclosed gears.  They are available in eight ISO- and AGMA- Viscosity grades.  Molub-Alloy Gear Oils meet the requirements of API GL-4.  Molub-Alloy Gear Oils self-lubricating solids of suitable grades are treated to increase their natural positive affinity to metal surfaces and are completely dispersed to assure a high protection against wear during the lubricants full working life

Recommended for the application in spur and herringbone gearing as well in straight or spiral toothed bevel gears.  They are especially used for heavy duty and shock loading where extreme pressure characteristics are needed.

Molub-Alloy Gear Oils are available in following viscosities:

SAE 100 to 140,

AGMA 3 EP to 8 Comp.,

ISO VG 100 to ISO VG 680.

Can be applied by oil can, oil cup reservoir, splash and central or circulation systems

Molub-Alloy General Purpose Oils

Molub-Alloy GP Oils are manufactured from mineral base oils selected to meet the most critical requirements for industrial applications, including excellent viscosity-pressure (load) relationship and a low residual carbon content.  Metallic lubricating solids that have a natural affinity for metal surfaces and are of select grade and size are specially treated to remain effectively dispersed throughout the extended life of the oil.  These oils are additionally compounded to inhibit oxidation and to protect against rust and corrosion.  GP Oils further feature anti-foam agents to prevent foaming

Molub-Alloy GP Oils are used for a wide range of industrial applications including machine tools, circulation systems and gear boxes where non-EP gear oils are specified.  Appropriate viscosities of GP Oils are particularly suited for air-compressor operation.  Not only is their potential for carbonaceous deposits negligible, but they protect against cylinder wear with minimal application of oil. 

Molub-Alloy GP Oils are applied by spraying, splash lubrication, oil can, central lubrication systems, drip feed systems, etc

Molub-Alloy 240 HT

Molub-Alloy 240 HT is an elevated temperature grease applicable in ball and roller bearings and bushings, where mineral base oil grease is not suitable.  Permanent temperatures up to 160 °C are allowed

240 Grease is most commonly used in sealed bearings of overhead conveyors for tunnel ovens or other high temperature service.  The application of these greases may be achieved by any standard dispensing method

Virgin Insulating Oil BS 148 & VacPac

Virgin Insulating Oil BS 148 is a Naphthenic base oil which has been specially refined to give optimum performance in electrical transformers and switchgear in the Class 1 category

The main functions of Virgin Insulating Oil BS 148 are to insulate and cool transformer windings, as well as to quench the electric arc that forms between contacts as they separate in switchgear or circuit breakers

Product Name

Description

Application

Molub-Alloy 300 S & 1500 Gear Oils

Molub-Alloy 300 S & 1500 Gear Oils are high performance EP gear oils that fulfill the requirements of industrial manufacturers and the manufacturers of mining machinery.  In these applications the lubricant film has to resist shock load, sudden changing of velocity and direction of stroke.  It also has to resist the high loads of high torque drives

Molub-Alloy 300 S & 1500 Gear Oils are especially suited for service in enclosed gears for heavy duty industry and mining machinery.  They are applicable in several gearing types under continuous high or shock load, as spiral toothed, bevel, spiral toothed bevel gearings or worm gears.  They may also be used in central or circulating systems and in automatic dispersing equipment

Molub-Alloy 369 Dry Film

Molub-Alloy 369 was developed as dry film lubricant for dusty environments where other lubricants containing oil will soon become an abrasive paste.  In addition it is suited for all cases in which it is strictly necessary to avoid any oil contamination once the machine has been lubricated.  Molub-Alloy 369 contains a high concentration of MOLUB-ALLOY solids in a volatile carrier liquid with excellent creeping and wetting characteristics.  After evaporation of the carrier liquid a dry adhesive film of solid lubricants remains on the metal surface

The lubrication of fitting surfaces before mounting in order to facilitate the assembly and a later dismounting.  Application as dry film lubricant in dusty environments where oily lubricants will come to be an abrasive paste within short.  The lubrication of machines and installations where any contamination with oil has to be avoided once the lubricant has been applied

Molub-Alloy 491 C Special Lubricant

Molub-Alloy 491 C is a lubricant especially designed for applications in heavy industry where due to the prevailing high temperatures the use of combustible or coking lubricants is impossible.  A relatively high concentration of

MOLUB-ALLOY solid lubricants is evenly floating in the base fluid water.  These solid lubricants have a good affinity to metal surfaces.  After a relatively thin dilution of Molub-Alloy 491 C at the beginning, it can be further diluted step by step for maximum economic efficiency

For injection and extrusion molding of aluminium as well as for the lubrication of molds in the glass and rubber industries (separation of surfaces in tire molds), the lubrication of bearing saddles between gear rim and outer casing of -chemicals- and lime kilns.  For normal operating processes which require a disassembly of tight fitting elements as well as for friction surfaces subject to very slow and discontinuous rolling motions and a constant thermal stress of more than 150 °C.  After mixing with water the fluid can be applied by brush or by directly spraying on the friction surfaces

Product Name

Description

Application

Molub-Alloy 777 Greases

Molub-Alloy 777 greases were designed for very heavy-duty service under severe ambient conditions.  They are blended and compounded to withstand shock loads as well as heavy loads, conditions commonly found in the steel and construction industries, in mining and forestry

Typical applications are in all types of rolling and sliding bearings, spindles, joint couplings (except for high-speed precision couplings), running gears, cams and general grease lubricating points, especially where heavy loads and low speeds prevail.  Molub-Alloy 777 greases are especially suited for the lubrication of heavy machines e.g. forging presses or hauling machines 

Molub-Alloy 848  Elevated Temperature Grease

Molub-Alloy 848 Grease was developed specifically to lubricate pallet wheel bearings and seal bar mechanisms in plants sintering iron or non-ferrous metals.  848 has been engineered to withstand elevated temperatures for prolonged period and seal out concentrations of airborne contaminants that characterize sintering operations

Molub-Alloy 848 Grease is most commonly used in the primary metal industries where sintering and other moderate-to-high temperature operations are accompanied by a high degree of airborne contaminants.  848 grease may be used for general applications in plain or anti-friction bearings.  848 offers extended lubrication at temperatures up to 120 °C (250 °F), including intermittent exposure to higher temperatures

Tribol 4020 Greases with TGOA

The load-carrying, anti-wear and friction reducing capabilities of Tribol 4020 Greases exceed conventional complex greases.  High performance is the result of the TGOA-additives which, under relatively high specific loads and related temperatures, promote a non-destructive smoothing of surface roughness in the micro-range

Tribol 4020 Greases with TGOA are designed as multiservice lubricants for heavy duty applications of plain and anti-friction bearings from medium to high loads and normal to elevated operating temperatures (max. +150 °C)

Product Name

Description

Application

Molub-Alloy 936 SF HEAVY open gear lubricant

Molub-Alloy 936 SF HEAVY is a uniquely compounded open gear lubricant developed specifically for use on heavy-duty equipment in mining and industrial service.  It forms a tough lubricating film on the friction surfaces which is resistant to pressure and shock loads as well as unfavorable ambient conditions.  The structural integrity and strength of the lubricating film is particularly valuable in the critical process of running in new gears because of the natural occurrence of high spots (asperities) in newly machined surfaces

All types of open gears, rails and rollers, racks and pinions, dipper sticks and other slides, shovels and draglines.  Molub-Alloy 936 SF HEAVY may be applied via automatic lubricating systems.  With the adequate equipment Molub-Alloy 936 SF HEAVY can be pumped at temperatures down to 0°C.  In case no automatic systems are available Molub-Alloy 936 SF HEAVY can also be applied manually

Molub-Alloy 8031 Multi-purpose lubricants

Molub-Alloy 8031 Multi-purpose lubricants are designed to lubricate heavily loaded open gears, screw-type actuators, and low to moderate speed sliding and rolling bearings equipped with centralized lubrication systems.  This product line is formulated to be readily pumpable for good lubricant distribution in enclosed and semi-enclosed applications and drainable for easy removal from gear guards.  This product is also specifically formulated to resist packing in gear tooth roots

Molub-Alloy 8031 Multi-purpose lubricants are recommended where the extra security of extreme pressure and anti-wear characteristics are required, and where product build-up is to be avoided.  Molub-Alloy 8031 may also be used to lubricate unsealed bushings, bearings and gears in units where fluid lubricants may leak out.  Molub-Alloy 8031 is formulated to minimize the plugging of the lubricant distribution lines commonly associated with conventional greases

Tribol 1510 Synthetic gear oils

Tribol 1510 gear oils with TGOA represent a significant advan-chemicals- in gear oil technology.  TGOA is a new oil additive package designed to reduce friction while providing surface improvement and protection.  The TGOA additive package can outperform most other EP and anti-wear additives because of its unique action on friction surfaces

Tribol 1510 gear oils may be used in a temperature range from -30 °C to +120 °C.  They are most valuable during the running-in process as well as in application where the surfaces have already been damaged in the micro-range.  Typical applications are spur, helical, herringbone, bevel and planetary gears.  They are also used in geared couplings, rolling and sliding bearings as well as in gear drive circulating systems

Product Name

Description

Application

Tribol 4747 High-temperature grease

Tribol 4747 High-temperature grease with TGOA is a clear multi-service lubricant designed to extend the service life of bearings in heavy-duty applications and at elevated temperatures.  Because of the high base oil viscosity Tribol 4747 provides a heavier oil film for applications at slower speeds, higher loads and/or higher temperatures

Tribol 4747 grease with TGOA is designed as a multi-service lubricant for heavy-duty applications of rolling and sliding bearings for temperatures up to 160 °C (peak temperatures up to 180 °C).  Tribol 4747 grease should be used when loads are moderate to heavy and speeds are slow to moderate

Tribol 3020/1000 Fluid greases with TGOA

Tribol 3020/1000 fluid greases with TGOA were designed for applications which require good pumpabilty of the lubricant and properties to withstand heavy loads.  In gear units which are not sealed oil-tight and in large slow-speed bearings the Tribol 3020/1000 fluid greases provide for a sufficient lubricating film due to their high base oil viscosity

Typical applications for Tribol 3020/1000 fluid greases are non-oil-tight gear units, rolling and sliding bearings, bushings, slides and general lubrication designed for fluid-grease lubrication.  Operating temperatures range from -40°C to +120 °C

Tribol 1730 Chain Oil

Tribol 1730 is a unique Chain Oil developed for normal temperatures and peak temperatures up to

150 °C

Tribol 1730 is used for lubrication of conveyor and power transmission chains at room temperatures or elevated temperatures in moist environments.  It can be applied by drip, spray or brush or used in automatic lubrication systems

Product Name

Description

HPO Motor Oils

HPO Motor Oils are high quality mono-grade detergent lubricant suitable for petrol and normally aspirated diesel engines powering passenger cars, light trucks, tractors and stationary equipment

All Climate 20W-50 Motor Oil

All Climate 20W-50 Motor Oil is a high quality, universal multi-grade engine oil suitable for all types of petrol, LPG and light diesel engines

XLD SAE 20W-50

XLD SAE 20W-50 is a universal multi-grade crankcase lubricant of superior quality engineered for use in turbo and multivalve engines

Turbo V SAE 20W-50

Turbo V SAE 20W-50 is a universal multi-grade lubricant suitable for turbo and multivalve engines, both petrol and diesel

Maxlife Motor Oil

Maxlife Motor Oil is a new motor oil, specially formulated to help meet the demands of “high-mileage” engines.  High mileage engines tend to decrease in performance and increase oil consumption.  Maxlife Motor Oil with scientifically formulated additive system helps to slow down the aging process and maximize the life of you engine.  Maxlife is designed for passenger cars and light trucks with engines which have been running for more than 100,000 kms.  Maxlife is not intended for real “Old Timer” models

Durablend Motor Oil

Durablend Motor Oil is formulated with a combination of synthetic and premium quality base oils and advanced additive technology.  This motor oil helps engines maintain peak performance by providing protection under severe service conditions.  Durablend motor oil meets the performance requirements of virtually all cars and light trucks (vans), including petrol, diesel and LPG engines

SynPower Motor Oil

SynPower Motor Oil is a premium fully synthetic motor oil, formulated with the highest quality synthetic base oils, enhanced with the most advanced additive technology.  SynPower motor oil provides ultimate performance in meeting the latest requirements for virtually all cars and light trucks (vans) including petrol, diesel and LPG engines.  SynPower motor oils provide superior protection at start-up, even under extreme conditions.  Suitable for extra longdrain intervals

All-Fleet Motor Oil

All-Fleet Motor Oil are premium quality mono-grade heavy duty lubricants formulated for use in most diesel and petrol engines

All-Fleet Extra 15W-40

All-Fleet Extra 15W-40 is a super high performance diesel motor oil (SHPD) for use in extra heavy duty, turbo charged industrial and truck engines

Premium Blue Engine Oil SAE 15W-40

Premium Blue Engine Oil SAE 15W-40 is designed to provide advanced lubricant performance in modern, low emission diesel engines including 2002 emission-certified engines, with cooled exhaust gas recirculation (EGR) operating under a wide variety of service conditions.  The advanced product technology offers a long-life, extended drain capability, balanced formulation which helps maximize engine durability

Premium Blue GEO-LA SAE 40

Premium Blue GEO-LA SAE 40 is a universal motor oil for stationary engines running on natural gas.  Suitable for Cummins engines, Dresser-Rand, Caterpillar,

Deutz-MWM and others.  Premium Blue GEO-LA keeps the engines clean and protects against corrosion and wear.  The product has a high resistance against oxidation and nitration which helps prevent oil thickening.  Premium Blue GEO-LA SAE 40 is based on high quality mineral base oils and fortified with a select additive system to guarantee a long engine life

ProFleet Motor Oil SAE 10W-40

ProFleet Motor Oil SAE 10W-40 is a synthetic and/or premium blend motor oil engineered for the needs of high performance diesel engines in truck, bus and industrial applications.  It fulfils the new Ultra High Performance Diesel (UHPD) recommendations of major engine builders.  The unique formulation helps provide maximum deposit control and soot protection for cleaner engines.  The oil is capable of providing long drain service intervals for trucks driving long distances

Product Name

Description

White Synthetic Chain Lube

White Synthetic Chain Lube uniquely providing excellent penetration characteristics with either o-ring or x-ring designs.  White Synthetic Chain Lube is suitable for use with all chains, in either on-road or

Off-road applications.  Delivering optimum anti-wear protection, the product also features excellent bonding to metal, ensuring maximum chain and sprocket life.  White Synthetic Chain Lube also leaves a white film, which not only makes the application process easier, but provides the customer with a simple way to see that the service has been completed satisfactorily.  The product requires only 10-15 minutes after application before it will perform to specifications

SynPower 4T

SynPower 4T is a high performance fully synthetic motor oil for all 4-cycle motorcycle engines.  The product is wet clutch compatible and is recommended for Japanese and other motorcycles where API SG of JASO MA fluids are specified.  This product is specially formulated to exceed the requirements of all leading engine manufacturers and provides superior protection in severe operating conditions.  SynPower 4T gives a quick cold start and smooth lubrication, even under very cold weather conditions

SynPower 2T

SynPower 2T is a high performance fully synthetic low-smoke motor oil for all two-cycle motorcycle engines.  The product is specially formulated to exceed the requirements of all leading motorcycle manufacturers and provides superior protection in severe operating extremes.  SynPower 2T gives a strong oil film that protects against wear and corrosion.  The product is pre-diluted for easier mixing and may be used in both injector and pre-mix applications.  Use fuel/oil ratios as specified by the engine manufacturer up to maximum of 100:1

Special Two Stroke

Special Two Stroke is a lubricating oil for air cooled two-stroke motorcycles, lawnmowers, chain saws and other similar two-stroke engines

BIA Outboard Oil TCW 2

BIA Outboard Oil TCW 2 is a oil for two cycle marine outboard engines

BIA Outboard Oil TCW 3

BIA Outboard Oil TCW 3 is a superior quality ashless two cycle lubricant.  Premium basestocks are blended with a modern ashless detergent additive package to provide fortification of maximum performance in outboard engines.  It is pre-diluted for ease of mixing with petrol and may also be used in injector systems.  This product is recommended for all leading 2-stroke outboard engines, including the latest high horsepower units.  Two Cycle Engine Oil will also provide excellent performance to two cycle engines of motorcycles, chain saws, lawnmowers and snowmobiles.  It may be used at manufacturers recommended fuel/oil ratios from 11:1 to 100:1

Product Name

Description

Super Tractor Oil Universal

Super Tractor Oil Universal (STOU) is a multi-functional oil for most modern tractors, excellent lubrication for the engine, transmission, hydraulics, power take-off and wetbrakes

Unitrac Fluid

Unitrac Fluid is a multi-purpose all-weather tractor hydraulic fluid.  Exclusively designed to satisfy the advanced performance requirements of all farm equipment manufacturers.  It provides the improved functional properties needed today by tractor fluids that must operate at higher temperatures and under heavier loads.  Compounded with high quality base oils and carefully selected additive systems to provide a long lasting fluid with multiple applications

Product Name

Description

Heavy Duty Synthetic Transmission Fluid SAE 50

Heavy Duty Synthetic Transmission Fluid SAE 50 is selectively engineered for heavy duty manual transmissions operating in severe service applications (temperature extremes, extended drain intervals, critical units, etc.) and requiring a MIL-L-2104 mineral engine oil.  It is a blend of premium synthetic base stocks and high quality additives to meet the challenging demands of manual transmission lubrication in modern equipment

STX Gear Oil GL-5

STX Gear Oil GL-5 is a premium gear oil specially formulated for use in all hypoid and other gears in axles and transaxles where the manufacturer specifies an

API GL-5 type lubricant.  The product offers smooth running gear operation under various temperature conditions, and gives protection against rust and corrosion.  Recommended for passenger cars, trucks and busses.  Not for limited slip applications

X-18 Multipurpose Gear Oil SAE 75W-80

X-18 Multipurpose Gear Oil SAE 75W-80 is a multipurpose automotive gear lubricant recommended for manual gear boxes, drive axles and some final drives of passenger cars, vans and light trucks

X-18 Multipurpose Gear Oil SAE 80W-90

X-18 Multipurpose Gear Oil SAE 80W-90 is a multipurpose automotive gear lubricant with extreme pressure (EP) characteristics for use in transmissions, axles and hypoid final drives.  Meets the 80W viscosity requirements

Product Name

Description

HP Gear Lube 85W-140

HP Gear Lube 85W-140 is a “High Performance”, extreme pressure gear oil for use in all gears and rear axles requiring an API GL5 lubricant, suitable for both SAE 85W and SAE 140 in conventional hypoid differentials

Drive Train Transmission Oil

Drive Train Transmission Oil is a heavy duty power transmission and drive train lubricant designed and recommended for transmissions in city busses, off-road machines, lift trucks, specialty vehicles and other such equipment.  It is designed for transmissions and drive trains only and should not be used as an engine oil

Product Name

Description

EP Gear Oil

EP Gear Oil is a range of high quality industrial gear lubricants embodying a selected sulphur-phosphorus extreme pressure additive system.  These gear lubricants are intended for service in enclosed gear sets operating under severe shock and overload service conditions.  EP Gear Oil 460T contains polymeric adhesive additives to prevent run-off which makes it suitable for use in open gear systems and as a chain lubricant

Product Name

Description

ATF Type II-D

ATF Type II-D is an automatic transmission fluid designed to meet the service requirements of General Motors Dexron II-D, and is suitable as a service fill for most vehicles

Automatic Transmission Fluid Dexron III/Mecron

Automatic Transmission Fluid Dexron III/Mecron is a premium automatic transmission fluid specially formulated to meet the needs of today’s more compact transmissions, running at higher operating temperatures and with electronic control.  Automatic Transmission Fluid Dexron III/Mecron is recommended for use in automatic transmissions, where the manufacturer prescribes a GM Dexron IIE, Dexron III of Ford Mercon fluid

Product Name

Description

Ultramax Hydraulic

Ultramax Hydraulic grades are high quality heavy duty hydraulic oils with extreme pressure properties, suitable for hydraulic systems, generators, selected compressors, machine tools, servo controls and bearings

Ultramax HVI 68

Ultramax HVI 68 is a high viscosity index (160) hydraulic oil designed to give performance over varying temperature ranges

Product Name

Description

Val-Lith EP Greases

Val-Lith EP Greases is a multipurpose extreme pressure greases suitable for a wide range of automotive and industrial applications.  For operating temperatures from -20 °C to 100 °C.  Recommended for use in anti-friction bearings, water pumps, chassis fittings, grease cups, universal joints of passenger cars, trucks, busses and earth moving equipment.  Suitable for the full range of bearing speeds encountered in electric motors and production equipment

Special Moly EP Grease

Special Moly EP Grease as the name indicates, is an extreme pressure grease fortified with a fine molybdenum disulphide to render a superior grease for automotive and industrial lubrication.  Recommended for use as a multi-purpose grease for CV joints, ball joints, steering linkage, chassis fittings, universal joints, track rollers and wheel bearings.  Can be employed at operating temperatures up to 170 °C.  For use in trucks, tractors, draglines, bulldozers, cranes and many other off-road and industrial applications

X-All Grease

X-All Grease is an organophyllic clay based, non-melting grease.  This grease has good adhesive and cohesive properties and finds application where high temperatures, 120 °C to 250 °C, limit to use of soap-based greases in roller bearings, oven chains, tunnel kiln car bearings, guides and slides

Multipurpose Lithium Complex Grease

Multipurpose Lithium Complex Grease is a non-leaded lithium complex extreme pressure grease.  This versatile product has been developed as a wheel bearing, chassis and CV joint grease suitable for all types of vehicles.  It may also be used in high speed fans, pumps, electric motor bearings, couplings, bush type bearings, pins and bushes

Product Name

Description

Brake Fluid Dot 3

Brake Fluid Dot 3 is a non-mineral fluid designed for medium to high temperature operating conditions encountered in automotive vehicles fitted with hydraulic brake and clutch systems

Brake Fluid Dot 4

Brake Fluid Dot 4 is a high boiling fluid, based on polyglycol ethers and esters, specifically formulated to meet and exceed the superior standards of all automobile manufacturers

Chain Oil

Chain Oil is a fortified neat mineral oil designed for the effective lubrication of chain saw links, guides and cutter bars

Compressor Oil 100

Compressor Oil 100 is manufactured from high viscosity index mineral oil reinforced with selected additives

1-2-99

1-2-99 is a multi-purpose lubricant, penetrant, cleaner, moisture displacer and rust preventative.  This versatile product is ideal for household, automotive, marine and industrial applications.  Protects from corrosion with a transparent, non-staining, non-sticky film.  Cleans and lubricates in either hot or freezing conditions; helps free frozen locks or other mechanisms.  1-2-99 is a most useful item for the handyman, sportsman, hobbyist on industrialist

Shackle Fluid

Shackle Fluid is a carefully formulated lubricant and preservative for rubber shackles and joints

Calibration Fluid

Calibration Fluid is a product used for the calibrating and flushing of diesel fuel injection equipment.  The viscosity and density are strictly controlled to ensure accurate calibration of injection pumps

Grinding Coolant 90:1

Grinding Coolant 90:1 is a water extendible chemical fluid used as a grinding coolant for machine grinding of ferrous metals, open-grain cast iron and many alloys

Soluble Oil

Soluble Oil is a general-purpose, low cost cutting oil recommended for milling, turning, sawing and drilling of easily machined metals.  Oil is readily soluble in water and renders an opaque milky emulsion

Valtac 68

Valtac 68 is a special machine oil developed for the lubrication of machine-tool ways and slides, especially where precision or slow speeds prevail.  Chatter and stick-slip conditions are eliminated and additives with low friction coefficient are incorporated to provide excellent lubricity and reduced friction losses.  Valtac 68 forms a persistent oil film with good adhesion resulting in minimum wear to both slides and ways extending the service life and reliability of machine tools

Jetclean RTU

Jetclean RTU is a ready-to-use powerful, solvent based, water washable degreasing fluid

Concrete Mould Release Fluid

Concrete Mould Release Fluid is a low viscosity, highly refined mould release oil containing specialized additives that provide a unique release action producing clean, stain free castings.  The low viscosity provides maximum coverage

Product Name

Description

Antifreeze and Summer Coolant

Antifreeze and Summer Coolant is a phosphate free, high quality mono-ethylene glycol based cooling system protector, recommended as an all-year-round coolant for liquid cooled engines even those predominantly aluminum

HD Extended Life Concentrate

HD Extended Life Concentrate is an engine coolant for trucks, busses, roadbuilding machines and industrial equipment, and fulfils the requirements of the most leading heavy duty engine manufacturers.  The product is free of nitrites, amines and phosphates, which makes it more friendly to the environment.  HD Extended Life Concentrate protects cooling systems against frost, corrosion and overheating for at least 3 years, 7000 hours or 500,000 km.  Suitable for open and closed cooling systems and aluminium engine blocks.  The product is mixable with other coolants on basis of ethylene glycol, but that may shorten the long-life characteristics.  The product can be mixed with water in several concentrations, depending on the desired freeze protection

Maxlife Coolant AF 50/50 RTU

Maxlife Coolant AF 50/50 RTU (ready to use) coolant especially formulated for higher-mileage vehicles with over 100,000km.  The product is designed to help maximize the engine’s cooling system lifespan and protect it from corrosion and hard water scale deposits.  Maxlife Coolant AF 50/50 RTU is suitable for cast-iron as well as aluminium engines.  By keeping the cooling system clean and free from scale, the thermal transfer will be optimal.  This formulation contains extra anti-scaling and anti-corrosion inhibitors to prevent the build-up of these deposits and keep the cooling system working efficiently.  Maxilife AF 50/50 RTU (ready to use) and should not be mixed with water.  Protects the cooling system against freezing and over-heating

Soft Shell Storage Tanks

Filled Length

Filled Width

Maximum Fill Height

11,350 ltr

4.27m

4.27m

0.72m

11,350 ltr Open Top

3.78m

3.78m

1.42m

37,850 ltr

5.67m

7.01m

1.09m

75,700 ltr

8.53m

7.01m

1.67m

189,300 ltr

19.67m

7.01m

1.67m

795,000 ltr

20.91m

20.91m

1.67m

Product

Description

Main Components

Application/Uses

SADC

Acetone

Pure dimethyl ketone of 99.9% mass purity

Dimethyl ketone

Used as a chemical intermediate in Methyl Methacrylate (MMA),

Bis-Phenol A (BPA), MIBK, DAA and MIBC production, solvent in paints, inks, nail polish removers, acetylene cylinders, adhesives.  Also used in the manufacture of pharmaceuticals, vitamins and cosmetics

Y

Methyl Ethyl Ketone (MEK)

Pure methyl ethyl ketone of 99.7% mass purity

Methyl ethyl ketone

Used in nitro-cellulose, polyester and most alkyd and phenolic resins, in degreasing of metal surfaces and in extraction of fats, oils and waxes

Y

Methyl Iso-Butyl Ketone (MIBK)

Pure methyl iso-butyl ketone of 99.5% mass purity

Methyl iso-butyl ketone

Used in nitro-cellulose and other natural and synthetic resins, adhesives, herbicides and plastics.  Also used as an extractant for certain metals and antibiotics and for dewaxing of mineral oils.  Other applications are production of synthetic leather, transparent paper, aluminium foil and degreasing of metal surfaces; extraction of fats, oils and waxes

Y

Product

Description

Main Components

Application/Uses

SADC

Ethyl Acetate

Ethyl acetate 99.8% mass purity

Ethyl acetate

As a solvent in surface coatings, inks and as a process and extraction medium.  Good solvent for a variety of resins including epoxies, urethanes, cellulosics, acrylics and vinyl in application such as coatings for wood furniture and fixtures, containers and closures, auto refinishing, for wood maintenance and marine.  General solvent in formulations for products such as adhesives and cosmetics

Y

n-Propyl Acetate

Normal Propyl acetate of 99.7% mass purity

n-Propyl acetate

As a solvent in surface coatings, inks and a process and extraction medium.  Good solvent for a variety of resins including epoxies, urethanes, cellulosics, acrylics and vinyl in application such as coatings for wood furniture and fixtures, containers and closures, auto refinishing, maintenance and marine.  Extraction medium in the pharmaceutical industry and general solvent in formulations for adhesives and cosmetics

Y

n-Butyl Acetate

Normal Butyl acetate of 99.5% mass purity

n-Butyl acetate

Used in the manufacture of fast drying coatings and paints.  This includes acrylic and nitrocellulose lacquer systems, wood lacquers; and automotive paints.  Other applications include as a reaction process, solvents for adhesives, extraction solvents in fermentation processes and in cleaning specialist components in electronics

Y

Product

Description

Main Components

Application/Uses

SADC

Acetic Acid

Food grade Acetic acid of 99.0% mass purity

Acetic acid

Used in the manufacture of acetic anhydride, cellulose acetate, vinyl acetate, acetic esters and chloroacetic acid.  Application in the production of plastics, pharmaceuticals dyes, insecticides, photographic chemicals, textiles and food additives (for example pickling)

Y

Product

Description

Main Components

Application/Uses

SADC

Ethanol 99.9/UN

Absolute Ethanol of 99.99% volume purity undenatured

Ethanol

Pharmaceuticals, cosmetics, toiletries, surgical procedures, flavours, fragrances, aerosols, chemical intermediates and printing inks

Y

Ethanol 99.9/DB

Absolute Ethanol of 99.99% volume purity denatured with Denatonium Benzoate

Ethanol, Denatonium Benzoate

Pharmaceuticals, cosmetics, toiletries, surgical procedures, flavours, fragrances, aerosols and printing inks

Y

Ethanol 96.5/UN

Absolute Ethanol of 99.99% (v/v) purity min. diluted to 96.5% (v/v) min.  Ethanol content with denim water

Ethanol, water

Pharmaceuticals, cosmetics, toiletries, surgical procedures, flavours, fragrances, aerosols and printing inks

Y

Ethanol 96.5/DB

Ethanol of 99.99% volume purity, diluted 96.5% with denim water denatured with Denatonium Benzoate

Ethanol, water, Denatonium Benzoate

Pharmaceuticals, cosmetics, toiletries, surgical procedures, flavours, fragrances and printing inks

Y

Product

Description

Main Components

Application/Uses

SADC

Iso-Propylol®™

Essentially

iso-Propyl alcohol (85% min. purity by mass) containing approximately 15% Ethanol

iso-Propanol and ethanol

As a solvent in lacquers, lacquer thinners, etch primers, liquid printing inks, disinfectants, fungicides, latex rubber production, foundry dressings, stain removers, antifreeze, screenwash, de-icing and as a fountain solution in lithographic printing

Y

Iso-Propyl Alcohol (IPA) Cosmetic

Cosmetic grade iso-Propyl alcohol of 99.96% mass purity

iso-Propanol

Pharmaceuticals, cosmetics, toiletries, flavours, surgical procedures, fragrances, aerosols, chemical intermediates and printing inks

Y

Iso-Propyl Alcohol 99.9 (IPA)

Chemically pure iso-Propyl alcohol of 99.9% mass purity

iso-Propanol

As a solvent in lacquers, lacquer thinners, liquid printing inks, disinfectants, fungicides, latex rubber production, antifreeze and screen wash

N

n-Propanol

Normal Prolpyl alcohol of 99.9% min. purity by mass

n-Propanol

As a solvent in antiseptics, pharmaceutical preparations, drug synthesis, cosmetic preparations and flexographic inks.  As a raw material for the manufacture of normal propyl amines, normal propyl paraben, normal propyl bromide and normal propyl acetate

Y

Propylol

Essentially normal propyl alcohol (85% min purity by mass) containing approx. 12% secondary butyl alcohol

n-Propanol and sec-butanol

As a solvent in lacquers, lacquer thinners, etch primers, liquid printing inks, disinfectants, fungicides, latex rubber production, foundry dressing, stain removers, antifreeze and as a fountain solution in lithographic printing.  As a raw material for the manufacture of xanthates, acetates and mixed alkylated glycol ethers

Y

Product

Description

Main Components

Application/Uses

SADC

n-Butanol

Chemically pure normal Butyl alcohol

n-Butanol

As a solvent in lacquers, lacquer thinners, etch primers, liquid printing inks, disinfectants, fungicides, latex rubber production, foundry dressing, and stain removers.   As a raw material for the manufacture of xanthates, phthalates, acetates, mixed alkylated glycol ethers and butylated resins

Y

Iso-Butanol

Chemically pure iso-Butyl alcohol

iso-Butanol

As a solvent in lacquers, lacquer thinners, etch primers, liquid printing inks, disinfectants, fungicides, latex rubber production, foundry dressing, stain removers, antifreeze and as a fountain solution in lithographic printing.  As a raw material for the manufacture of xanthates, acetates and mixed alkylated glycol ethers

Y

SABUTOL ®™

A mixture of normal butyl alcohol (60% min purity by mass), iso-butyl alcohol and secondary pentyl alcohol

n-Butanol, iso-butanol and

sec-pentanol

Paints, lacquer thinners, liquid printing inks, flexographic printing and dyes, in the foundry industry, in the manufacture of butylated amino resins and plasticisers.  As a raw material for the manufacture of xanthates, acetates and mixed alkylated glycol ethers

Y

Product

Description

Main Components

Application/Uses

SADC

Butyl Glycol Ether (BGE)

Butyl Glycol Ether of 99% purity

2-Butoxy-ethanol

Butyl Glycol Ether (BGE) is used widely in the surface coating industry as a solvent.  BGE reduces the viscosity in alkyd resin varnishes and acts as a property regulator, coalescer and flow improver in water based paints.  Other applications include printing inks, cleaners and mineral oil emulsions, where BGE is used as a solubiliser.  BGE has outstanding solvent power for many natural and synthetic resins along with cellulose derivatives

N

Product

Description

Main Components

Application/Uses

SADC

Acylic Acid (Glacial)

Glacial Acrylic Acid of 99.0% (m/m) purity min.

Acrylic Acid

Used as intermediate in the production of super absorbent polymers, water treatment chemicals.  Other applications include the use in detergents, pulp and paper, clay textiles and surface coatings

Y

n-Butyl Acrylate

Pure normal Butyl Acrylate of 99.5% (m/m) purity min.

n-Butyl Acrylate

A versatile monomer to provide performance characteristics to polymer formulations for latex and solution copolymers, copolymer plastics and cross-linkable polymer systems.  Major markets include surface coatings, textiles, adhesives and plastics

Y

Product

Description

Main Components

Application/Uses

SADC

Ethyl Acrylate

Pure Ethyl Acrylate of 99.0% (m/m) purity min.

Ethyl Acrylate

A versatile monomer to provide performance characteristics to polymer formulations for latex and solution copolymers, copolymer plastics and cross-linkable polymer systems.  Major markets include surface coatings, textiles, adhesives and plastics

Y

Product

Description

Main Components

Application/Uses

SADC

Solumix

A mixture of toluene, xylene aliphatics

Toluene, xylene, C8 and C9 aliphatics

Diluent in lacquers thinners, enamels and liquid printing inks

Y

Product

Description

Main Components

Application/Uses

SADC

Kerosol 50/115

Cleaning benzine

C5-C6 paraffin’s

Cleaning, extraction of oils, manufacture of rubber solutions, tyres, adhesives, inks and lacquers

Y

Kerosol 94/125

An aliphatic hydrocarbon containing C7-C8 paraffin’s

C7-C8 paraffin’s

As a solvent in paints, printing inks, detergents rubber adhesives, mining chemicals, de-oiling of wax and lacquer thinners

Y

Kerosol 150/200

A special boiling point hydrocardon containing C9-C11 paraffin’s

C9-C11 paraffin’s

As a solvent for alkyd resins in enamel paints, detergents, aerosols and polishes and as a carrier for insecticides

Y

Product

Description

Main Components

Application/Uses

SADC

Alcosol 5

Industrial methyllated spirit (non-coloured industrial meths)

Ethanol, benzine, sabutol,

iso-propanol

Paint and printing

Y

Alcosol E5

A blend consisting of 95% SB70/52P6 and 5% ethyl acetate

Ethanol,

iso-propanol

Used in the manufacture of paint and lacquers, printing inks, dyes, industrial detergents, polishes, degreasers and rust removers

Y

Alcosol EM

A blend consisting of 95% SB70/52P6 and 5% MEK

Ethanol, MEK,

iso-propanol

Paints, inks and dyes

Y

Alcosol P1

A blend consisting of 90% SB70/52P6 and 10% ethyl acetate

Ethanol,

iso-propanol and ethyl acetate

Printing

Y

Alcosol E21

A blend consisting of 79% SB70/52P6 and 21% ethyl acetate

Ethanol,

iso-propanol and ethyl acetate

Paint, lacquers, printing inks, dyes, industrial detergents, degreasers and rust removers

Y

Coloured Ethylol

Mineralized methyllated spirit

Ethanol,

iso-propanol, benzine, sabutol, methyl, violet

Used in domestic burners and as a cleaning agent

Y

Product

Description

Main Components

Application/Uses

SADC

Thinsol 160

A standard lacquer thinner

Various ketones, aromatics, aliphatics glycol ethers

Solvent for nitro-celluose lacquers

Y

Thinsol 200

A high gloss lacquer thinner

Various ketones, aromatics, aliphatics glycol ethers

Solvent for nitro-celluose lacquers

Y

Thinsol 293

A super high gloss lacquer thinner

Various ketones, aromatics, aliphatics glycol ethers

Solvent for nitro-celluose lacquers

Y

Product

Description

Main Components

Application/Uses

SADC

Turposol 3.5

A substitute white spirit with 3.5% aromatic content

Aromatic aliphatics

Solvent for alkyd resins (in enamel paints) and as a substitute for turps where a low aromatic content is required

Y

Aromasol 17

A substitute white spirit with 17% aromatic content

Aromatic aliphatics

Solvent in enamels, polishes, hand cleaners and degreasers

Y

Turposol 17

A substitute white spirit with 17% aromatic content

Aromatic aliphatics

Solvent in enamels, other paints, degreasers, polishers, hand cleaners, dry cleaning and used as a wash-up solvent in litho and silkscreen printing

Y

Turposol 150/200

A substitute white spirit with 17% aromatic content

Aromatic aliphatics (special boiling point)

Solvent in enamels, other paints, degreasers, polishers, hand cleaners, dry cleaning and used as a wash-up solvent in litho and silkscreen printing

Y

Product Name

Description

Application

Optigear

Mineral gear oils with MFT

Spur and bevel gear units, even under severe operating conditions, rolling bearings, gear couplings, drive units of rail vehicles

Optigear BM

Mineral gear oils with MFT

Spur and bevel gear units, even under severe operating conditions, worm gear units, rolling and sliding bearings, gear couplings, circulating systems

Tribol 1100

Mineral gear oils with TGOA

Modern spur and worm gear units, medium to high loads, rolling and sliding bearings, circulating systems, oil sump temperature up to +90 °C

Tribol 1710

Semi-synthetic gear oils with TGOA

Modern spur gear units, medium to high loads, rolling and sliding bearings, circulating PAO systems, oil sump temperature up to +95 °C

Optigear Synthetic A

Synthetic gear oils with MFT

Industrial gears operating at wide temperature fluctuations and under high loads, sliding and rolling bearings

Optigear Synthetic X

Synthetic gear oils

Spur, bevel and planetary gearing, main gearing of wind power plants and oil-lubricated rolling bearings

Optigear RMO

Synthetic High Performance and long-life gear oil

Spur and bevel gearings also subject to harsh conditions, long-life gear oil rolling bearings, denture clutches, drives of rail-borne vehicles

Tribol 800

Synthetic gear oils

Modern worm and spur gear units, medium to high loads, rolling and sliding bearings, peak temperature up to +160 °C

Product Name

Description

Application

Hyspin AWS

Hydraulic oils

Hydraulic oils HLP according to DIN 51524.2, containing heavy metals

Hyspin SP

Hydraulic oils

Exceeds HLP according to DIN 51524.2, hydraulic systems and hydraulic drives, heavy metal free

Tribol 943 AW

Hydraulic and circulating oils

Hydraulic systems in modern NC machines, also for screw compressors

Product Name

Description

Application

Aircol PD

Mineral compressor oil

All compressor types, also at high compression temperatures (up to +220 °C)

Tribol 890

Synthetic compressor oils

All types of compressors, also at high compression temperatures (up to +220 °C)

Tribol 1555

Synthetic compressor oils

Screw-type and sliding vane compressors, good seal compatibility

Product Name

Description

Application

Molub- Alloy CO 22

Chain oil with solid lubricants

Drive chains subjected to medium speed and temperatures, dusty environments, wire ropes: core and outer surfaces

Tribol 1730

Chain oil

Conveyor and drive chains, low to medium temperatures and loads

Viscogen KL

High-temperature chain oils

Chain lubrication in the normal and high-temperature range

Tribol 1430

High-temperature chain oils

Transport chains at extremely high temperatures (long-term temperature above +240 °C, peak temperature up to +280 °C), compatible with paints

Optimol SHF

Chain oil

Chains, joint bolts, open lubricating points especially in the wet section

Tribol 1330

Chain oil

Chains in painting and drying installations (maximum temperature briefly +160 °C)

Viscogen KLK 25, 28

High-temperature chain oils

Chain lubrication of furnaces (operating temperature up to

+250 °C).  Extremely low surface tension allows extreme deep penetration also at points with tight gaps

Optifluid KTL 100, 220

High-temperature chain oils

Cathodic paint immersing installations evenly distributes in water or water-soluble paints

Product Name

Description

Application

Optileb PR

Thin-bodied white oil

Compressed-air conditioners and closing mechanisms, physiologically safe, NSF H1

Optileb DAB 8

Medicinal white oil

Closing mechanisms and as cleaning agent of stainless steel, physiologically safe, NSF H1, (also see F+D Fluid Spray)

Optileb TC 5

Physiologically safe special oil

Deep-drawing machines, stamping tools in dusty environments, in conformity with NSF H1 (also available as spray)

Optileb HY

Physiologically safe hydraulic oils

Hydraulic systems, HLP hydraulic oils DIN 51524 part2, NSF H1

Optileb GT

Physiologically safe gear oils

Drives, rolling and sliding bearings, NSF H1

Tribol FoodProof 1800

Physiologically safe gear oils

Worm, spur, bevel and planetary gear units, in conformity with

NSF H1

Optileb V

Physiologically safe compressor oils

Compressors according to specifications, in conformity with NSF H1

Viscoleb

Physiologically safe chain oils

Chains of production, filling and packaging machines in the beverage industry, NSF H1 (32, 280, 1500 also available as spray)

Tribol FoodProof 1835

Physiologically safe chain and circulating oils

Chain and circulating oils for low temperatures e.g. froster chains

Product Name

Description

Application

Tribol BioTop 1418

Gear oils

Gears, rolling and sliding bearings and circulating systems, oil sump temperature up to +90 °C, bio-degradable, according to

CEC L-33-A-94 > 80%

Tribol BioTop 1428

Chain oils

Chains at medium temperatures, bio-degradable, according to

CEC L-33-A-94 > 80%

Tribol BioTop 1448

Hydraulic oils

Hydraulic and circulating systems, bio-degradable, according to

CEC L-33-A-94 > 90%

Product Name

Description

Application

Penetrate WDP

Multi-purpose spray oil

Multi-purpose spray oil with excellent rust-dissolving properties

Optitex W

Textile machine oils

Washable oils for textile machines

Tribol 1060

Way oils

Slide ways and other sliding surfaces etc., also for gears and hydraulic systems

Viscogen G

Glass machine oils

Central lubrication of hollow glass machines

Optisynt HT

Synthetic paper machine oils

Circular lubrication in paper machines, calenders of the paper, textile and plastics industries

Optimol EC Coating

Synthetic oil

Electric plug connections in the electrical and electronics industry

Tribol 1414

Synthetic gear and circulating oil

Highly loaded spindle presses, gear units, hydraulic systems; approved by Müller Weingarten

Tribol 1390

Special anti-corrosive oils

CLP PG oils for the conservation of gears and components, also as running-in oil (FZG 12), chains exposed to extreme weather conditions

Product Name

Description

Application

Optimal Suspension SU

MoS₂ suspension in polyglycol

Black MoS₂ suspension for chain lubrication in the high-temperature range

Optimal Suspension HTGU

Graphite suspension in polyglycol

Suspension for extreme temperature

Molub-Alloy 491 C

MoS₂ suspension in water

Suspension of MoS₂ solid lubricants in water, conservation of fitting surfaces with solid lubricants

Product Name

Description

Application

Longtime PD

Rolling and sliding bearing greases with MFT

Highly loaded and high-speed rolling and sliding bearings, long-term and lifetime lubrication

Olista Longtime

Rolling and sliding bearing greases with MFT

Rolling and sliding bearings exposed to difficult operating conditions such as humidity dust, vibrations

Optipit

Rolling and sliding bearing greases with MFT

Rolling and sliding bearings with low peripheral speeds in humid, dusty environments

Tribol 3020/1000

Rolling and sliding bearing greases with TGOA

Rolling and sliding bearings at low speeds, non-oil-tight units, general grease lubrication

Olit CLS

Multi-purpose grease

Central lubrication systems, rolling and sliding bearings

Olit 2 EP

Multi-purpose grease

Rolling and sliding bearings under difficult operating conditions

Olit 00

Semi-fluid multi-purpose grease

Semi-fluid grease for central lubrication systems

Olistamoly 2

Multi-purpose grease with solid lubricants

Long-term lubrication of rolling and sliding bearings

Molub-Alloy BRB 572

Rolling and sliding bearing grease with solid lubricants

General lubrication of rolling bearings at medium loads, sliding bearings, suited for central lubrication systems

Tribol 3785

Rolling and sliding bearing grease with wide temperature range

Pumpable at extremely low temperatures short-term peak temperatures +140 °C

Molub-Alloy 777

Rolling and sliding bearing greases

Rolling and sliding bearings at high loads, suited for central lubrication systems

Molub-Alloy 3036/680-1

Rolling and sliding bearing grease with solid lubricants

Rolling and sliding bearings subject to high loads suitable for central lubrication

Molub-Alloy 860

Rolling and sliding bearing grease with solid lubricants

Sliding and rolling bearings, medium loads (ISO VG 220) and higher loads (ISO VG 460), long-term temperature up to +140 °C

(short-term +150 °C)

Tribol 4020

Rolling and sliding bearing greases with TGOA

Rolling and sliding bearings, medium and high loads, water-resistant, long-term temperature up to +150 °C (short-term +160 °C)

Product Name

Description

Application

Optitemp MT

Rolling and sliding bearing greases for increased temperatures

Long-term lubrication of rolling and sliding bearings resistant to water and alkaline solutions, wide temperature range

Optitemp HT 2, HT 2 EP

Rolling and sliding bearing greases for increased temperatures

Rolling and sliding bearings in the high-temperature range, medium bearing pressures

Tribol 4747

Rolling and sliding bearing greases for increased temperatures

Sliding and rolling bearings, high loads with increased wear protection in the boundary and mixed friction area (short-term up to +180 °C)

Optitemp PS

Rolling and sliding bearing greases for high temperatures

Rolling and sliding bearings in high temperature range, subject to impact loads extremely water resistant

Firetemp XT 2

Rolling and sliding bearing greases for high temperatures

Rolling and sliding bearings in the normal and high temperature range, also suited for central lubrication systems

Thermogrease 2, F

Rolling and sliding bearing greases for high temperatures

Rolling and sliding bearings under pressure, re-lubrication with Thermogrease F

Viscotemp

Rolling and sliding bearing greases for high temperatures

Long-term lubrication of rolling and sliding bearings at high loads and in aggressive environments

Inertox Heavy, Medium

Rolling and sliding bearing greases for extremely high temperatures

Rolling and sliding bearings,

long-term application at low speeds, resistant to solvents, benzene, water

Molub-Alloy 2115

Rolling and sliding bearing greases for extremely high temperatures

Sliding and rolling bearings at high loads, long-term temperature up to +250 °C, use 2115-0 for re-lubrication, Tribol 1899 as cleaning agent

Optisil FM

Silicone grease

Slightly loaded rolling and sliding bearings, plastic material combinations, for separating and sealing

Product Name

Description

Application

Molub-Alloy 243 Arktik

Lubricating grease

Sliding and rolling bearings at low temperatures

Optitemp TT1, TT 1 EP

Rolling and sliding bearing greases

Bearing lubrication at high speeds or wide temperature fluctuations

Optitemp LG

Rolling and sliding bearing grease

Rolling and sliding bearings, door lock cylinders, good compatibility with plastics

Product Name

Description

Application

Viscogen 0

Sprayable adhesive

Semi-fluid grease for long-term lubrication of open drives and wires, sprayable

Viscogen 4

Adhesive lubricant

Lubrication of open gears in all weathers

Tribol 5000

Grease spray with TGOA for open gears

Grease spray (automatic system), high loads (FZG > 12), long-term temperature up to +120 °C

Molub-Alloy 3710

Mill grease

Lubricating grease for high loads and dust, e.g. for mill drives

Molub-Alloy 9790

Multiservice lubricating grease

Lubricating grease for open gears at high loads and low speeds, sprayable, for running-in use

Molub-Alloy 5010

Optitemp RB 1

Cable grease

Light beige grease, polyalphaolefin based for the lubrication of cables in robots, good compatibility with plastics

Molub-Alloy 936 SF Heavy

Open gear lubricant

Lubricant for open gears at high loads and low speeds, water-resistant, sprayable, solvent-free

Product Name

Description

Application

Obeen UF

Physiologically safe special greases

Central lubrication systems, gear units lubricated with semi-fluid, grease, for filling, labeling and sealing plants, bottle washers, physiologically safe, NSF H1

Obeen TAP 2

Physiologically safe grease for fittings

Beverage fittings, taps, racker arms, seals, rolling and grease for fittings sliding bearings, in conformity with NSF H1

Optisil LEB 2

Physiologically safe silicone grease

Lubrication of EPDM elastomers, beverage fittings, filling equipment, silicone grease in conformity with NSF H1

Obeen FS 2

Physiologically safe rolling and sliding bearing grease

Especially for the lubrication of bearings subjected to high speeds and low temperatures, in conformity with NSF H1

Obeen WS 2

Physiologically safe rolling and sliding bearing grease

White grease with solid lubricants, especially for low speeds, vibrations, in conformity with

NSF H1

Longtime Blanc